I Need a MIDI level 10 Ninja Wizard

If you have no idea where your question even goes, it probably goes here. Post may be moved to a more appropriate forum at some point as the topic blooms.

I Need a MIDI level 10 Ninja Wizard

Postby MIDIQuicksand » January 29th, 2017, 10:12 pm

hello,

I am getting back into music after a bit of a hiatus.

I got some new gear that I am trying to get to communicate via MIDI with some older stuff.

In particular, I am hoping to get 4 sequencers to all start with the click of a single play button.... without a computer.

Roland MV-30
Roland RC-505
Roland JDXi
and a Kurzweil K2000RS

I can get any of the two to play nice. But never more than two.

I also have, if it helps...
Yamaha YME8 (2 IN and 8 Thru)
System 360 Midi Patchbay (4 IN, 8 Out)
POCKET MIDI MERGE (1 Out, 2 IN)
Pocket MIDI Filter 1 in and 1 Out)


Any suggestions? Am I asking the impossible?

Thanks.

MIDIquicksand
MIDIQuicksand
 
Posts: 1
Likes: 0 post
Liked in: 0 post
Joined: January 29th, 2017, 9:54 pm
Real name: Rich

Advertisement

MASSIVE Mastering

Re: I Need a MIDI level 10 Ninja Wizard

Postby _controlfreak » January 29th, 2017, 11:26 pm

What happens if you use the K2000 as the host and connect it to the Yamaha thru box's input, and everything else to the split outs?

I understand this may not be the final, desired layout of your setup, but we need to troubleshoot the objects acting as "links" since you already know the devices are fine 1-on-1.

If that works, the next step would be finding out if and how your MIDI patchbay can be used as another Thru box instead of an In/Out patch.
My Music | The one thing that most imprisons a creative mind is a closed heart. ^_^
User avatar
_controlfreak
 
Posts: 252
Likes: 41 posts
Liked in: 99 posts
Joined: March 18th, 2013, 9:22 am
Location: Redlands, CA
Real name: Alex

Re: I Need a MIDI level 10 Ninja Wizard

Postby RockStar » May 8th, 2017, 4:29 pm

Well that's quite a mix.
Every one of those guys has a very different application.
You really have to decide what it is you want to do with this stuff.
Unless you're super-fast and efficient on the MV-30 you should just slave it up as a sound module.
As a sequencer it's pretty limited by today's standards not to mention a nightmare to operate.
Same story with the Kurzweil.
Unless your super cool on the sequencer then just leave it slaved up.
Love those JDXi's. You're going to want hands on that one.
So in lieu of another controller that's first in the chain.
Now the looper is a different animal altogether.
You could slave it to MIDI clock or drive the whole system with it's clock.
It does force you to clock it from EITHER usb or midi.
I'd probably just let that guy stand alone.
Again you really have to decide what you're trying to accomplish.
So with that in mind you could go: JDX -> Kurz -> MV -> RC(clock-slaved)
I'd be likely to drive it all with a DAW.
Is that a 360 MIDI Patcher?
If so that would be a good way to connect everything for flexibility.
Tell me more about the final goal.
Have a good time all the time.
-Viv Savage
User avatar
RockStar
 
Posts: 15
Likes: 5 posts
Liked in: 5 posts
Joined: April 12th, 2013, 4:49 pm
Location: Kansas City
Real name: Rock Star


Return to Goofy Newb Stuff Area

Who is online

Users browsing this forum: No registered users and 1 guest

cron